Zhejiang Good Adhesive Co., Ltd
Zhejiang Good Adhesive Co., Ltd CHOOSE GOOD, GOOD CHOICE
Add to Cart
White Liquid Synthetic Rubber Dispersion Hot Melt Glue Adhesive Forar Seat Interior Materials , Door Plank Covering
YD-3365
SPECIFICATIONS
| Properties Specifications Test Methods | ||
| BASE | Synthetic Rubber Dispersion | |
| COLOR | White | |
| SHAPE | Liquid | |
| SOLID CONTENT | 52-27% | GB/T15332-1994 |
| SPECIFIC GRAVITY(20℃) | 1.01 ~ 1.10 g/cm3 | GB/T2790-1995 |
| VISCOSITY(180℃) | 50-1500 mPas | HG/T3660-1999 |
| BOILING POINT | 100℃ | |
| FREEZING POINT | 0℃ | |
|
1. Should be applied by 2-component spray gun. 2. Coverage: depending on the porosity of substrates, test is needed. 3. Substrate surface should be dry and oil or grease free. 4. Contact: Immediately after the application 5. Open time: Approx. 10 ~ 20 min. 6. Assembly: Pressure may be needed by manual or mechanical methods to enhance the initial bonding. 7. Final bonding strength test: 2 to 24 hours after bonding assembly, make sure the bonded adhesive is fully cured and dried.
|
